Shop

Science Bodyboards Launch Nemo Tri Quad Vent Channel Polypro Core 2024 Model

James Nymeyer Signature Model

He is one of the most technical riders around. his board utilises the ever popular Science Launch template with a slightly thinner core and no mesh it gives this ride an incredible feel and flex. Hold on tight cause this thiung flys!

The Launch (Speed) : The fastest board in Science’s lineup.
A straighter than normal template designed to be excessively fast through all sections with a simple aim: to launch you as high as humanly possible.
The Launch holds a strong rail in deep hollow barrels where driving speed is a must. Aim for a section, whether it be down the line of a deep pit or towards a lip to
aiming for the stars, the Launch will get you there.

FEATURES
TEMPLATE: Launch
CORE: Polypro Core
Polypro Core is a state of the art engineered bodyboard core. A lightweight core that is fusion formed to create a nucleus that delivers incredible flexural properties,
including instant recoil, added projection, enhanced longitudinal stiffness & awesome compression strength. 100% waterproof
STRINGER: 1 x  RCS Stringer
SLICK: Surlyn by DuPont
DECK: Wavecushion Air 8lb PE
RAILS: 55/45 Double rails
TAIL: Crescent Tail
ADDITIONAL FEATURES: Tri Quad Channels, Nose Bulbs, Screened Deck/ Slick Print, Ltd Deck Heat Stamp, Contour

Tech: Tri Quad Vent Concave
The New Tri / Quad Channel Tail combo is a on or off Channel System. It engages when you need it and has a normal ride in cruise mode.The Four Channels are narrow and deep with a flat section in centre to help give you a bit more release when you need it. Push hard on your rail and the quads rip in with hold and drive and combined with the Tri Crescent hooks in the First and Fourth Channel this allows you to turn sharper and still keep the hold and drive your after.
LAUNCH NEMO QUAD FLEX FACTOR – F5

SCIENCE BODYBOARD FLEX FACTOR RATING

You may have noticed your equipment works differently depending on the temperature. The way a board flexes and recoils in warm conditions is different than in the cold.

Your personal preference for what you consider as optimum flex is unique to where you live and what your local temperatures are. To take the guess work out of which of our boards is softer (generally better for colder conditions) or stiffer (generally better for warmer conditions) and to help you dial in flex we have created the Science Flex Factor. F1 being the stiffest composition we make and F10 being the softest.

If the board indicates a F+ then an ISS Stringer is in place (e.g. F3+) the flex rating becomes a +or- depending on the ISS Stringer being used.

– Science Flex Factor System is only relative to the Science Bodyboard Range and should not be compared to any other Brands.

BOARD SPECS

Note: All measurements are taken at outside of rail. * NTWP = Nose to Wide Point